800-508-2788

Cleanburn Waste Oil Heaters

CB-1400 FURNACE
Max. BTU/Hour: 140,000 (41 kW)
Fuels: Used Crankcase, ATF, Hydraulic; #2, #4 and #5 Fuel OilsUses: Small garages, shops, and workspaces.

Availability: North America

Learn more>

CB-3250 FURNACE
Max. BTU/Hour: 325,000 (95.3 kW)Fuels: Used Crankcase, ATF, Hydraulic; #2, #4 and #5 Fuel OilsUses: Facilities generating or collecting more than 1000 gallons of used oil annually.

Availability: North America

Learn more>

CB-1750 FURNACE
Max. BTU/Hour: 175,000 (51.25 kW)Fuels: Used Crankcase, ATF, Hydraulic; #2, #4 and #5 Fuel OilsUses: Suitable for facilities generating smaller quantities of used oil annually.

Availability: Worldwide*

*The international equivalent is the model CB-1500.

Learn more>

CB-3500 FURNACEMax. BTU/Hour: 350,000 (102 kW)Fuels: Used Crankcase, ATF, Hydraulic; #2, #4 and #5 Fuel OilsUses: Service facilities with four or more bays and where larger quantities of used oil are generated or collected.

Availability: Worldwide

Learn more>

CB-2500 FURNACE
Max. BTU/Hour: 250,000 (73 kW)Fuels: Used Crankcase, ATF, Hydraulic; #2, #4 and #5 Fuel OilsUses: Facilities generating or collecting more than 1000 gallons of used oil annually.

Availability: Worldwide

Learn more>

CB-5000 FURNACE
Max. BTU/Hour: 500,000 (146 kW)Fuels: Used Crankcase, ATF, Hydraulic; #2, #4 and #5 Fuel OilsUses: Large repair and service facilities with multiple bays where larger quantities of used oil are generated and/or collected.

Availability: Worldwide

Learn more>

MODEL CB-1400

The Clean Burn Model CB-1400 is the smallest and most economical Clean Burn used-oil furnace in terms of initial cost. It produces approximately 140,000 BTU/hr. and is ideal for small garages, shops, and workspaces.

INDUSTRY LEADING ENGINEERING AND CONSTRUCTION

  • Engineered from the ground up to burn used oils
  • Patented heat exchanger generates more heat
  • Unique non-welded flue tubes for longer service life
  • Advanced burner preheats oil, regulates and optimizes combustion
  • Swing-away burner and door make maintenance and service easy
  • Longest cleaning interval of all units in its class
  • Lower stack temperatures, higher heat output
  • Automatic flow control means no fuel adjustment required
  • Ideal for unit heating, or as part of a Clean Burn Recycling Center
  • Unequaled service and support through your Clean Burn Distributor
  • Government purchasing: GS-07F-5357P

Ask the Experts

800-508-2788

Office: M-F 8am-4pm EST
Email Us

MODEL CB-1750

The Clean Burn Model CB-1750 produces approximately 175,000 BTU/hr. and is the smallest of the low profile designs, making it ideal for numerous applications and convenient installations. As a broad guideline, the Model CB-1750 is suitable for facilities generating smaller quantities of used oil annually.

INDUSTRY LEADING ENGINEERING AND CONSTRUCTION

  • Engineered from the ground up to burn used oils
  • Patented heat exchanger generates more heat
  • Unique non-welded flue tubes for longer service lifeAdvanced burner preheats oil, regulates and optimizes combustion
  • Swing-away burner and door make maintenance and service easy
  • Longest cleaning interval of all units in its class
  • Lower stack temperatures, higher heat output
  • Automatic flow control means no fuel adjustment required
  • Ideal for unit heating, or as part of a Clean Burn Recycling Center
  • Unequaled service and support through your Clean Burn Distributor
  • Government purchasing: GS-07F-5357P

Ask the Experts

800-508-2788

Office: M-F 8am-4pm EST
Email Us

MODEL CB-2500

The larger of the two Clean Burn low profile models, the Model CB-2500 used-oil furnace produces approximately 250,000 BTU/hr and is extremely popular at facilities such as 2 to 4 bay auto repair and truck service shops. The CB-2500 is highly versatile and reliable and can be easily ceiling mounted or used in conjunction with a Clean Burn Recycling Center. Although many factors affect furnace selection, the CB-2500 is frequently used in facilities generating or collecting more than 1000 gallons of used oil annually. A Clean Burn Distributor is the expert you want for furnace selection and installation. View or Download Complete Furnace Specifications

INDUSTRY LEADING ENGINEERING AND CONSTRUCTION

  • Engineered from the ground up to burn used oils
  • Patented heat exchanger generates more heat
  • Unique non-welded flue tubes for longer service lifeAdvanced burner preheats oil, regulates and optimizes combustion
  • Swing-away burner and door make maintenance and service easy
  • Longest cleaning interval of all units in its class
  • Lower stack temperatures, higher heat output
  • Automatic flow control means no fuel adjustment required
  • Ideal for unit heating, or as part of a Clean Burn Recycling Center
  • Unequaled service and support through your Clean Burn Distributor
  • Government purchasing: GS-07F-5357P

Ask the Experts

800-508-2788

Office: M-F 8am-4pm EST
Email Us

MODEL CB-3250

The largest of the three Clean Burn low profile models, the Model CB-3250 used-oil furnace is rated at approximately 325,000 BTU/hr. and is UL listed for use as a unit heater or central (ducted) furnace.This unique low-profile unit provides more installation and functional options than any other used-oil furnace. The low profile is ideal for limited ceiling heights, and the range of installation options is unsurpassed.Clean Burn used-oil furnaces are engineered from the ground up to burn a wide range of used-oils for free heat, and comply with all EPA regulations. Your Clean Burn distributor is a fully trained and highly experienced expert in used-oil combustion technology. With Clean Burn you get a superior product, unrivaled support and the greatest return on your investment for years to come.

INDUSTRY LEADING ENGINEERING AND CONSTRUCTION

  • Engineered from the ground up to burn used oils
  • Patented heat exchanger generates more heat
  • Unique non-welded flue tubes for longer service lifeAdvanced burner preheats oil, regulates and optimizes combustion
  • Swing-away burner and door make maintenance and service easy
  • Longest cleaning interval of all units in its class
  • Lower stack temperatures, higher heat output
  • Automatic flow control means no fuel adjustment required
  • Ideal for unit heating, or as part of a Clean Burn Recycling Center
  • Unequaled service and support through your Clean Burn Distributor
  • Government purchasing: GS-07F-5357P

Ask the Experts

800-508-2788

Office: M-F 8am-4pm EST
Email Us

MODEL CB-3500

The Clean Burn Model CB-3500 is an industrial grade used-oil furnace for service facilities with four or more bays and where larger quantities of used oil are generated or collected. The CB-3500 generates approximately 350,000 BTU/hr and is UL listed for use as either a unit heater or central (ducted) furnace. A Clean Burn Distributor is the expert you want for furnace selection and installation.

INDUSTRY LEADING ENGINEERING AND CONSTRUCTION

  • Engineered from the ground up to burn used oils
  • Patented heat exchanger generates more heat
  • Unique non-welded flue tubes for longer service lifeAdvanced burner preheats oil, regulates and optimizes combustion
  • Swing-away burner and door make maintenance and service easy
  • Longest cleaning interval of all units in its class
  • Lower stack temperatures, higher heat output
  • Automatic flow control means no fuel adjustment required
  • Ideal for unit heating, or as part of a Clean Burn Recycling Center
  • Unequaled service and support through your Clean Burn Distributor
  • Government purchasing: GS-07F-5357P

Ask the Experts

800-508-2788

Office: M-F 8am-4pm EST
Email Us

MODEL CB-5000

The Clean Burn CB-5000 is the largest used-oil furnace the EPA allows. No other unit is as robust and reliable for extracting free heat from used oils. The CB-5000, which generates approximately 500,000 BTU/hr, is the choice for large repair and service facilities with multiple bays where larger quantities of used oil are generated and/or collected. A Clean Burn Distributor is the expert you want for furnace selection and installation.

INDUSTRY LEADING ENGINEERING AND CONSTRUCTION

  • Engineered from the ground up to burn used oils
  • Patented heat exchanger generates more heat
  • Unique non-welded flue tubes for longer service lifeAdvanced burner preheats oil, regulates and optimizes combustion
  • Swing-away burner and door make maintenance and service easy
  • Longest cleaning interval of all units in its class
  • Lower stack temperatures, higher heat output
  • Automatic flow control means no fuel adjustment required
  • Ideal for unit heating, or as part of a Clean Burn Recycling Center
  • Unequaled service and support through your Clean Burn Distributor
  • Government purchasing: GS-07F-5357P

Ask the Experts

800-508-2788

Office: M-F 8am-4pm EST
Email Us