800-508-2788

Clean Energy Waste Oil Furnaces

MEAN AND A LOT OF GREEN

Our advanced line of next-generation waste oil furnaces is more innovative, more efficient and easier to service than any other. And because our furnaces operate on used motor oil, transmission fluid and other petroleum products, they generate a solid return-on-investment in addition to helping the environment.

ce-140

Learn More

CE-140 Waste Oil Furnace

An entry level waste oil furnace that’s perfect for a garage with 1 to 4 bays. It’s the best way to start saving today.

Heats up to 4,000 Sq. Ft* | 140,000 BTU

Learn More >

Learn more

Learn more

CE-180 Waste Oil Furnace

A waste oil furnace that creates clean, safe heat for a garage with 3 to 6 bays.

Heats up to 5,000 Sq. Ft* | 175,000BTU

Learn More >

ce-250

Learn more

CE-250 Waste Oil Furnace

A powerful waste oil furnace that saves your business money by turning used oil into heat. This furnace will heat a garage with 5-8 bays.

Heats up to 7,000 Sq. Ft* | 245,000 BTU

Learn More >

ce-330

Learn more

CE-330 Waste Oil Furnace

Our largest, most powerful waste oil furnace can easily heat large areas while saving you money. This furnace will heat a garage with 7 or more bays.

Heats up to 9,000 Sq. Ft.* | 325,000 BTU

Learn More>

CE-140 Waste Oil Furnace

ce-140Small Heater, Big Savings

This furnace heats up to 4,000 sq. ft.*

The Clean Energy Heating Systems CE-140 Waste Oil Furnace is an entry level waste oil heater that’s perfect for a garage with 1 to 4 bays. With up to 140,000 BTU’s of heating output coupled to our innovative new design, it’s a very cost-effective way to heat smaller spaces.

Best of all, thanks to the CE-140’s ability to turn used motor oil, transmission fluid and other petroleum products into clean, safe heat, this waste oil furnace generates solid ROI while helping the environment.

In addition, all Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings, and their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.

Best of all, every Clean Energy waste oil furnace is built with our unique, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.

Features and benefits that set them apart.

  1. Robust, Durable Heat Exchanger-Stainless Steel exchanger and flue tubes
  2. Longer Service Intervals – vertical flue tubes (1,000+ hours)
  3. Produces More Heat – high velocity air swept heat exchanger
  4. Easy Cleaning – over center latches on doors
  5. Dependable, Easy-to-Install Metering Pump – pre-assembled, vacuum-tested
  6. Quick, Easy Access Oil Line Connector Block – allows easy access without disconnecting oil line
  7. Reliable Operation – digital, programmable burner control

*Approximate values

CE-140 Waste Oil Furnace Key Features

  • High velocity air swept heat exchanger
  • Vertical Stainless Steel flue tubes
  • 6″ chimney outlets on left or right side
  • Tank, wall or ceiling mountable
  • 1,000 plus hour cleaning interval
  • Digital wall thermostat
  • 140,000 BTU/hour Input
  • 1.0 GPH fuel consumption
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • Burner with Interrupted Duty Ignition
  • 1,700/75°F, air flow output CFM/heat rise
  • 115vac, 60hz, single phase, 20A breaker
  • 77″l x 28″h x 26″w (w/burner and blower)
  • 430 lbs hanging weight
  • UL Listed
  • cUL Listed
  • 10 Year Warranty
  • Made in the USA

CE-180 Waste Oil Furnace

ce-180Big Innovation in a Small Package

This furnace heats up to 5,000 sq. ft.*

Our CE-180 Waste Oil Furnace is a strong performer for a 3 to 6 bay garage. With up to 175,000 BTU’s of output coupled to an innovative design, it’s a cost-effective and eco-friendly way to heat garages, workshops and other small to medium-sized spaces.

And thanks to its ability to turn used motor oil, transmission fluid and other petroleum products into clean, safe heat, the CE-180 generates solid ROI while helping the environment.

In addition, all Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They’re built to install easily and allow for longer cleaning intervals, and their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.

Best of all, every Clean Energy furnace is built with our unique, patent-pending, heat exchanger and flue tubes. This innovation ensures long-lasting durability and highly efficient operation for years to come.

Features and benefits that set them apart.

  1. Stainless steel heat exchanger to eliminate rust
  2. Longer Service Intervals – vertical flue tubes (1,000+ hours)
  3. Produces More Heat – high velocity air swept heat exchanger
  4. Easy Cleaning – over center latches on doors
  5. Dependable, Easy-to-Install Metering Pump – pre-assembled, vacuum-tested
  6. Reliable Operation – digital, programmable burner control

*Approximate values  

CE – 180 Waste Oil Furnace Key Features

  • High velocity, stainless steel, air swept heat exchanger
  • Vertical, stainless steel flue tubes
  • 6″ chimney outlets on left or right side
  • Tank, wall or ceiling mountable
  • 1,000 plus hour cleaning interval
  • Digital wall thermostat
  • 175,000 BTU/hour
  • 1.2 GPH fuel consumption
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • Burner with Interrupted Duty Ignition
  • 1,700/80°F, air flow output CFM/heat rise
  • 115vac, 60hz, single phase, 20A breaker
  • 83″l x 28″h x 26″w
  • UL Listed
  • cUL Listed
  • 10 Year Warranty
  • Made in the USA

CE-250 Waste Oil Furnace

ce-250Big BTU’s, Big Innovation

This furnace heats up to 7,000 sq. ft.*

Our CE-250 Waste Oil Furnace is a strong, eco-friendly furnace that’s been designed to efficiently heat a 5 to 8 bay garage. With up to 245,000 BTU’s of output and all of Clean Energy’s patent-pending design advances, it’s a powerful way to heat warehouses, garages and other large spaces that’s as eco-friendly as it is economical.

And thanks to its ability to run on used motor oil, transmission fluid and other petroleum products, the CE-250 makes economic and environmental sense for your business.

In addition, all of our waste oil furnaces are engineered from the ground up to burn used oils and comply with all EPA regulations. They’re designed for easy installation, longer cleaning intervals and flexible installation in areas with limited ceiling heights and other access requirements.

Best of all, every Clean Energy furnace is built with our patent-pending heat exchanger and flue tubes. This innovation ensures long-lasting durability and highly efficient operation for many years to come.

Features and benefits that set them apart.

  1. Stainless steel heat exchanger to eliminate rust.
  2. Longer Service Intervals – vertical flue tubes (1,000+ hours)
  3. Produces More Heat – high velocity air swept heat exchanger
  4. Easy Cleaning – over center latches on doors
  5. Dependable, Easy-to-Install Metering Pump – pre-assembled, vacuum-tested
  6. Reliable Operation – digital, programmable burner control

*Approximate values

CE – 250 Waste Oil Furnace Key Features

  • High velocity, stainless steel, air swept heat exchanger
  • Vertical, stainless steel flue tubes
  • 6″ chimney outlets on left or right side
  • Tank, wall or ceiling mountable
  • 1,000 plus hour cleaning interval
  • Digital wall thermostat
  • 245,000 BTU/hour
  • 1.7 GPH fuel consumption
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • Burner with Interrupted Duty Ignition
  • 2,700/90°F, air flow output CFM/heat rise
  • 115vac, 60hz, single phase, 30A breaker
  • 100″l x 28″h x 26″w
  • UL Listed
  • cUL Listed
  • 10 Year Warranty
  • Made in the USA

CE-330 Waste Oil Furnace

ce-330The Biggest Furnace and The Best Savings

This furnace heats up to 9,000 sq. ft.*

The Clean Energy Heating Systems CE-330 Waste Oil Furnace is our largest heater, and is perfect for quickly and effectively heating a garage with 7 or more bays. With up to 325,000 BTU’s of output coupled to our innovative new furnace design, the CE-330 is truly a hot performer.

Thanks to the ability to turn used motor oil, transmission fluid and other petroleum products into clean, safe heat, the CE-330 waste oil heater generates solid ROI in addition to helping the environment.

Also, all Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with EPA regulations. They easily install and provide for longer intervals between cleanings, and their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.

Best of all, every Clean Energy waste oil heater is built with our unique, patent-pending heat exchanger and flue tubes. This design ensures long-lasting durability and highly efficient operation for years to come.

Features and benefits that set them apart.

  1. Stainless steel heat exchanger to eliminate rust
  2. Longer Service Intervals – vertical flue tubes (1,000+ hours)
  3. Produces More Heat – high velocity air swept heat exchanger
  4. Easy Cleaning – over center latches on doors
  5. Dependable, Easy-to-Install Metering Pump – pre-assembled, vacuum-tested
  6. Reliable Operation – digital, programmable burner control

*Approximate values 

CE-330 Waste Oil Furnace Key Features

  • High velocity, stainless steel, air swept heat exchanger
  • Vertical, stainless steel flue tubes
  • 8″ chimney outlets on the right or left side
  • Tank, wall or ceiling mountable
  • 1,000 plus hour cleaning interval
  • Digital wall thermostat
  • 325,000 BTU/hour Input
  • 2.3 GPH fuel consumption
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • Burner with Interrupted Duty Ignition
  • 3,700/85°F, air flow output CFM/heat rise
  • 230 vac, 60hz, single phase, 30A breaker
  • 111″l x 32″h x 26″w
  • UL Listed
  • cUL Listed
  • 10 Year Warranty
  • Made in the USA